Manley Labs JUMBO SHRIMP Tube Line Preamplifier Black
Sporting a minimalist signal path, the Jumbo Shrimp stereo preamplifier from Manley Labs houses the ability to deliver remarkable output drive as well as high dynamic range.
Features
- All vacuum tube all-triode design
- 2 x 12AT7EH Input Tubes
- 2 x JAN NOS GE 7044 dual triode 'Interstage Follower' Tubes
- 2 x 7044 Output Tubes
- Mute switch plus warm-up delay
- ALPS motorised volume control (no detents)
- Includes RF remote control
Jumbo Shrimp features an all-valve design consisting of dual 12AT7 input tubes, 5670 driver tubes and 7044 output tubes. By employing a unique 'White Follower’ output stage over more traditional Cathode Follower stages, the Shrimp can operate at a super-low 50 ohm output impedance meaning that driving almost any source is made dramatically easier. The final result is high-bandwidth, low noise performance with modest local negative feedback and negligible distortion.
Remora Control
Manley include an RF ‘Remora’ remote control as standard with every Jumbo Shrimp operating on a Radio Frequency control medium. Unlike InfraRed options, RF enables users to control their Manley preamp without the usual point-and-click gesture and attenuators can even be controlled from adjacent rooms, through doors and through closed-equipment cabinetry.
Specifications
- Gain: 12dB
- Input Impedance: 250 kOhm
- Max Input: 5V = 1.5% THD
- Frequency Response: 10 Hz - 80 KHz; 20 Hz - 20KHz, -0.3dB
- S/N Ratio: 95 dB A-weighted
- THD: 0.02% @ 1V rms output
- Output Impedance: 50 Ohms
- Max Output: +20dBm @ 1.5% THD into 600 Ohm load
- Inputs: 5x unbalanced RCA line level
- Outputs: 2x unbalanced RCA sets
- Record Out: 1x RCA set (unbuffered/passive)
- Dimensions: 483 x 280 x 89mm, 6.8kg
